How to Use an 8 Outlet Surge Protector with Coaxial Protection

Quick Answer

To use an 8 outlet surge protector with coaxial protection, plug the surge protector into a wall outlet, connect your devices to the AC outlets, and attach your cable or satellite coax line to the coaxial input and output ports. Always verify the surge protector is properly grounded and avoid daisy-chaining.

Step-by-Step Setup and Use

1. Choose a grounded wall outlet: Plug the surge protector into a standard 3-prong grounded wall outlet. Do not use a 2-prong adapter or an extension cord, as this can defeat the surge protection. Check that the outlet is properly grounded before plugging in.
2. Connect your coax cable: Attach the incoming coax line from your wall or cable box to the 'IN' port on the surge protector. Then run a short coax cable from the 'OUT' port to your TV, modem, or cable box. Make sure the coax connections are snug but not over-tightened to avoid damaging the threads.
3. Plug in your devices: Connect your electronics to the 8 AC outlets. Spread high-power devices like monitors and printers across different outlets to avoid overloading a single outlet. Count your devices to ensure you don't exceed the 8-outlet capacity; use a separate surge protector for additional devices.
4. Power on and test: Switch on the surge protector and verify that the power indicator light is on. If the light is off, the surge protector may be damaged or not receiving power; unplug and check the outlet. Test the coaxial connection by checking that your TV or modem receives a signal.

Product Facts

• 8 Outlet Home/Office Surge Protector with coxial protection: This Belkin 8 Outlet Surge Protector includes built-in surge protection rated at 3550 joules and coaxial protection for cable or satellite connections. The high joule rating means it can absorb multiple surges, and the coaxial port lets you protect your TV or modem from surges that come through the cable line.